Category: software engineering

Create a Fully-Dressed Use Case for Your Project

Posted on | by Linus | Leave a Comment on Create a Fully-Dressed Use Case for Your Project

Answer this question: Each team member should create a fully-dressed use case without working as a group. A use case should be labeled to show the creator’s name.
Answer it like the HW04 and create this full case from this website: https://online.visual-paradigm.com/drive/#diagramlist:proj=0&dashboard. You might have to use Use Case in the search.

Struggling with where to start this assignment? Follow this guide to tackle your assignment easily!

Guide to Structuring Your Paper Based on the Assignment Instructions

  1. Understand the Assignment Prompt:
    Start by thoroughly reading the assignment. The task requires you to create a fully-dressed use case individually, which should be labeled with your name. It’s important that you complete this without collaborating with your teammates.
  2. Access the Required Website:
    Visit the provided link: Visual Paradigm Online. Use the search bar to look for “Use Case.” This will direct you to the use case diagram section where you can start creating your use case.
  3. Create a Fully-Dressed Use Case:
    A fully-dressed use case includes the following details:

    • Use Case Name: Choose a clear, descriptive name for your use case.
    • Primary Actor: Identify the user or system interacting with the system (e.g., customer, administrator).
    • Goal: Specify the outcome the actor wants to achieve by interacting with the system (e.g., place an order, generate a report).
    • Preconditions: List any conditions that must be true for the use case to be initiated (e.g., user must be logged in).
    • Postconditions: Describe what should happen after the use case completes successfully (e.g., order is confirmed, report is generated).
    • Main Success Scenario: Outline the sequence of steps taken by the actor and the system to achieve the goal (e.g., steps for placing an order).
    • Extensions (Alternative Flows): Include any alternative paths or exceptions (e.g., payment failure, system error).
    • Special Requirements: Note any special conditions like performance requirements, security considerations, or legal constraints.
    • Creator’s Name: Clearly label the use case with your name as the creator.
  4. Document the Use Case:
    Once you’ve created the use case on the Visual Paradigm website, document the details. Ensure all sections are filled out as described above.
  5. Label the Use Case:
    It’s crucial to include your name at the end or beginning of the use case to ensure it’s clear who created it. For example, “Use Case Created by [Your Name]”.
  6. Review and Save:
    Once you have completed the use case, review all the details to ensure accuracy and clarity. Afterward, save your work and be ready to submit it as per your assignment instructions.

Hello, I urgently need your attention on this task I submitted to my professor!

Posted on | by Linus | Leave a Comment on Hello, I urgently need your attention on this task I submitted to my professor!

Hello, I urgently need your attention on this task I submitted to my professor!
http://tiny.cc/cp1kzz
They have indicated that if I make a few revisions, I’ll be all set to pass. There are a couple of critical updates and fixes required. I’ve shared the submission file with you, so you can see exactly what I turned in, right? The submission folder contains everything I submitted, and the Evaluation Report clearly lists the necessary revisions.
The Performance Assessment PDF outlines all the requirements I needed to follow. After submitting my work, I received the evaluation report back. Please let me know if anything is unclear—I’m ready to clarify while I’m still awake. This needs to be completed ASAP and CORRECTLY.
NO AI USAGE WILL BE ACCEPTED, AND ZERO PLAGIARISM!
I absolutely need this done today! It’s vital to have it wrapped up by the time I wake up in the morning. Thank you so much!

Create a Test Plan: A test plan is a document that outlines the strategy, object

Posted on | by Linus | Leave a Comment on Create a Test Plan: A test plan is a document that outlines the strategy, object

Create a Test Plan: A test plan is a document that outlines the strategy, objectives, and detailed procedures for testing a
software application or system. It serves as a blueprint for testing, ensuring that all necessary tests are conducted
thoroughly and systematically. A key component in a test plan is the test cases. A test case is a specific set of
conditions and variables under which a particular functionality or feature of a software application is tested. It is a
fundamental component within a test plan that verifies whether the application meets its specified requirements
and behaves as expected. Each team member should create at least two test cases (an example is attached). You will need to complete them for uploading study materials and managing failure when uploading study material. To get a good understanding of our project, I have sent the zip file.

cs.sjsu.edu/faculty/pearce/modules/projects/ood/miniMac/index.htm do the assignm

Posted on | by Linus | Leave a Comment on cs.sjsu.edu/faculty/pearce/modules/projects/ood/miniMac/index.htm do the assignm

cs.sjsu.edu/faculty/pearce/modules/projects/ood/miniMac/index.htm
do the assignment follow the instructions.
MiniMac
MiniMac is a virtual processor with a tiny but extendable memory and a tiny but extendable instruction set.
Here’s a screenshot of the MiniMac user interface:
The view panel on the right contains two lists (javax.swing.JList). The top list shows the contents of memory. The bottom list shows the program currently being executed. The control panel on the left contains three buttons (javax.swing.JButton). The first button prompts the user for a program to parse:
The second button executes the program. The third button resets all memory cells to 0.
These commands are duplicated under the Edit menu. The Help menu explains each command. The File menu contains the items: New, Save, Open, and Quit.
The MiniMax memory is an array of integers:
int size = 32;
Integer[] memory = new Integer[size];
A MiniMax program is a list of instructions. An instruction pointer (ip) indicates the position in the list of the next instruction to be executed.
Grammar
Here’s the instruction set grammar (note: “~” means “followed by” and all unquoted tokens are integers):
Load ::= “load” ~ location ~ value // memory[location] = value
Halt ::= “halt” // terminates the program
add ::= “add” ~ src1 ~ src2 ~ dest // memory[dest] = memory[src1] + memory[src2]
mul ::= “mul” ~ src1 ~ src2 ~ dest // memory[dest] = memory[src1] * memory[src2]
bgt ::= “bgt” ~ location ~ offset // if 0 < memory[location] ip += offset blt ::= “blt” ~ location ~ offset // if memory[location] < 0 ip += offset loop ::= “loop ~ count ~ instruction // executes instruction count times A block is a list of one or more instructions separated by semicolons and bracketed by curly braces: block ::= “{“ ~ instruction ~ (“;” ~ instruction)* ~ “}” Executing a block sequentially executes each instruction in the block’s body. For example, the program shown in the screenshot computes kn, where n is stored in memory[0]. The base, k, is stored in memory[2]. In this case k = 2, n was 7 and the result, 128, is stored in memory[1]. Memory[3] is the amount to decrement memory[0] each time the result is multiplied by k. Design Here’s the design of MiniMac: Parser Here’s a partial implementation of MiniMacParser.java. Note that it is a utility class (aka singleton), all of its methods are static. Testing Implement and test the following functions in MiniMax: Tri(n) = 1 + 2 + ... + n // stored in a file called tri Fib(n) = nth Fibonacci number // stored in a file called fib Less(n, m) = (n < m)?1:0 // 1 = true and 0 = false Log(n) = m where 2m <= n and n < 2m+1 In each case the input, n, should be stored in memory[0] and the output, f(n), should be stored in memory[1]. Hints 1.The MiniMax is a publisher and the view panel is its subscriber. Each time memory is updated or a new program is set, MiniMax notifies its subscribers. 2.The control panel is the action listener for its buttons. It navigates to the MiniMax and calls the appropriate procedure (execute and clear). 3.Parsing is more complicated. The control panel must prompt the user for a file name, read the file (as a string), then pass the string to MiniMaxParser.parse(program). It then sets the MiniMax program to the parser’s output, which causes a subscriber notification. Suggestion: ask ChatGPT how to read a text file in Java. 4.Ask ChatGPT for a simple example of how to use a JList.

The purpose of this homework is to deepen your understanding of domain modeling,

Posted on | by Linus | Leave a Comment on The purpose of this homework is to deepen your understanding of domain modeling,

The purpose of this homework is to deepen your understanding of domain modeling, a crucial aspect of software design
and architecture. This exercise will help you grasp the importance of accurately representing the various entities,
attributes, relationships, and constraints of a given problem domain. By the end of this assignment, you should be able to
effectively translate real-world problems into clear, well-structured domain models, a skill that is fundamental to
successful software development.
use this website to do the visual case diagram: https://online.visual-paradigm.com/drive/#diagramlist:new=UseCaseDiagram

The purpose of this homework is to deepen your understanding of domain modeling,

Posted on | by Linus | Leave a Comment on The purpose of this homework is to deepen your understanding of domain modeling,

The purpose of this homework is to deepen your understanding of domain modeling, a crucial aspect of software design
and architecture. This exercise will help you grasp the importance of accurately representing the various entities,
attributes, relationships, and constraints of a given problem domain. By the end of this assignment, you should be able to
effectively translate real-world problems into clear, well-structured domain models, a skill that is fundamental to
successful software development.
use this website to do the visual case diagram: https://online.visual-paradigm.com/drive/#diagramlist:new=UseCaseDiagram

MileMaster Auto Rentals seeks to implement an automated solution for managing ca

Posted on | by Linus | Leave a Comment on MileMaster Auto Rentals seeks to implement an automated solution for managing ca

MileMaster Auto Rentals seeks to implement an automated solution for managing car bookings, client invoicing, and vehicle auctions. The typical process involves a client reserving a vehicle, collecting it, and returning it after a set duration. Upon vehicle collection, the client can purchase or decline collision insurance. Once the car is returned, an invoice is issued to the client, who settles the payment. It’s important to note that the vehicle’s mileage is recorded at collection and return to calculate the correct billing amount. Besides renting vehicles, the company also auctions off any cars that have accumulated over 20,000 miles approximately every six months.
1. Using Visual Paradigm, construct a use case diagram from the above requirements statement showing all actorsand (at least four) major use cases. Your major use cases should include Reserve, Pick Up, and Return. Add <>, <>, and generalization relations as needed.
2. Write the Reserve Car and Return Car use cases using the brief format.
3. Write the Pickup use cases using the fully-dressed format.
You must use this website to make your case picture (search Use Case): https://online.visual-paradigm.com/drive/#diagramlist:proj=0&dashboard
DO NOT USE ANY AI (I will check)