Category: Software Development

developing a service that contains the following components: a web application with SOAP services with RESTFUL and JSON + CLOUD Services.

everything in a Word file, Don’t use the Ai. I’m going to run ai check and the professor as well, if I could detected that, she will find out that too.

Task details:
PSU has different branches all around Saudi Arabia, PSU is keen to expand more new branches in big cities:
New branch in Dammam (700 users)
New branch in Madinah (600 users)
New branch in Tabuk (500 users)
New branch in Al-Khobar (400 users)
You are required to design the topology for the four new sub-networks and their connection to the head office (Riyadh). You must document each step you have taken, including your research sources. You need to come up with a design report and send it to your technical manager.
Report: The report must contain the following sections
1. Introduction
2. Design of Network topology for PSU campuses
3. Floor-wise network design for each branch and their interconnectivity.
4. IP Addressing/ Subnetting
5. Required Software/Hardware
6. Conclusion
The PSU uses 180.XY.0.0/16 (Note: XY is the last 2 numbers in your student’s ID) at the campus in Riyadh with 1000 users and needs to use a subnetting structure to incorporate the new cities. Adhering to the subnetting scheme, assign a subnet address to the networks and their links. Each campus has 8 levels of building and access to the Internet is crucial for each office, as well as inter-branch-office networking. Each branch has 3 servers which are located on the Fifth floor of each branch. The main campus is in Riyadh and the new subnets must have connectivity with the main campus. You need to think about cost-effectiveness and PSU is aiming to create an Intranet for its branches in KSA. You need to think about creating a VPN for this campus
Students will choose a solution, and then implement and evaluate their solution. Students must submit a report that outlines the steps they followed to solve the problems. The approximate word length is up to 800 words with topology diagrams. The report should be presented with supporting material as appendices, such as the calculations for the IP addressing scheme

In Homework 1, you created the Specification for DoMore Software’s “Dolendar” product. However, for that assignment, you skipped the “heart” of the specification: the Functional Requirements section. In this assignment, you will complete the previous document by providing the Functional Requirements section.
Your Functional Requirements section should include:
A description of all of the functionality described by the customer that they want to be part of the contracted software product (i.e., not future directions). You can decompose these functionalities in multiple ways, but just be sure to describe all of the functionality that the customer decided that they wanted in the end.
Two use cases. Both of these should at least include the basic flow. These are textual descriptions with a user goal and a series of steps that make up the “flow”.One of these use cases should involve only the primary actor and the system. It should include a basic flow, an alternative flow, and an exception flow.
One of these use cases should involve a primary actor (i.e., the actor who has the “goal” of the use case), another actor, and the system. This one may only include a basic flow. In other words, I am not requiring an alternative flow nor exception flow for this one.
A use case diagram. This use case diagram should include all actors (again, make sure you learn about use cases from the slides and lecture videos) and a comprehensive list of use cases (or at least, as comprehensive as you can readily think of) and make sure that they include the two above use cases.
Notes:
– I have attached a transcript of Dolenar’s customer interview
– I have attached my initial requirements document
Scoring Breakdown
Functional Requirements section: 100 pointsFunctional Requirements: 50 points
Use Case 1: 20 points
Use Case 2: 10 points
Use Case Diagram: 20 points

Complete SAP project by Due Date.
Your default Userid and password are given to you. Upload the completion sheet below.
Link: CompletionSheetHCM.docx
Download CompletionSheetHCM (1).docxhttps://stockholm.cob.csuchico.edu:8029/sap/bc/gui/sap/its/webgui/#Links to an external site.
Client: 245
username: LEARN-666
PASSWORD:Nbagames1!
SAP HR CASE STUDY 1 = Case_Study_HCM_en (1).pdf
Till Page 47.
After logging in – Go to Controlling tab – Click on Curricula Material PDF.
Download Human Capital Management 1 Case Study in English.
Work on the steps in the PDF file.
In the steps in the PDF file use ### wherever applicable.
In your case ### is the last three digits of your userid.

For this week’s Signature Assignment, you will write a report providing details of network components and installed network capabilities and add simple diagrams of the four groups, and one overview diagram. Extend the work in Week 6 to provide a comprehensive review of a sound architecture that can deliver the required reliable and secure solution.
Be sure your report includes the following:
Management, monitoring, and control solutions that could enable a Network Operations Center to ensure ongoing success.
Remote users that work from home on company laptops.
A diagram to show a sample remote laptop configuration at an employee’s home.
Update from Week 6 overview diagram to include the three previous groups and the new remote user group.
Length: 12 to 15-page report providing details of network components and installed network capabilities and the simple diagrams of the four groups and one overview diagram.
References: Include citations and a minimum of 5 references for products and ideas used with no less than three scholarly sources from the NCU academic library supporting your choices.

1. Why is a highly coupled module difficult to unit test?
2. Calculate the cyclomatic complexity, and list all the basis paths.

For this week’s assignment, you will build and write a description of the diagrams, and then, describe how the pieces come together to maintain effective and reliable network communication.
Assume an organization is selling raw materials from multiple locations to a few hundred businesses with mobile sales and customer support agents. Agents use mobile applications to enter and adjust orders, verify inventory, update customer relationship management, track deliveries, and interact with employees at multiple offices and distribution points. The core applications are cloud-based while office interaction relies on solutions located and company locations.
Be sure your report includes the following:
Overview diagram of key components that would enable sound networks:across locations
to remote agent
remote customers sites
Each group’s components with a simple representative diagram for one member of the group.
Simple diagram that depicts how the various groups would interconnect with their offices and the cloud.
Length: 2-3 descriptions of the diagrams and explanations about how the pieces come together to maintain effective and reliable network communication. Provide 3 simple diagrams for single instances within each group (A to C above) and a fourth diagram depicting how the groups interact. All diagrams must be originals using Lucidchart (or equivalent) screenshots

For this week’s assignment, you will write a paper with at least one original table to match features and needs. Identify dependable solutions for a large organization. Combine the ideas in assignments 2 and 3, before extending them to include reliable solutions for a large number of remote and mobile users.
Be sure your paper includes the following:
Solution’s ability to capture data and effect remote control across multiple locations that have a range of IoT devices.
Approaches to control software, defenses, and updates on remote machines and phones and extend them to include secure communication.
Remote wipe capabilities and asset tracking for smartphones.
Explanation of the process followed to install and configure virtual PC’s.
Length: A 4 to 6-page paper with appropriate diagrams and screenshots
References: Use no less than 3 quality sources from the internet and two scholarly sources from the NCU library

https://uta.instructure.com/files/28520895/downloa…
Student Handout
Your organization is developing and testing a database. You are asked to fix any errors in the test database—provided to you by your instructor- and improve upon it. (Note : Achieve 2nd Normal form. Ignore dependency of State and City on ZIP code). Delete any old macros in the tables that might be interfering with the creation of tables..
*. The database has no relationships defined. Primary keys may be missing or not correct.
*. Please note that all data in the database is test data and hence can be modified/replaced as needed. If a column does not exist, create it.
*. Each item belongs to a Category.
1. Enforce entity integrity for all tables (Hint: Primary Key) (Exceptions: HISTORY tables).
(0.50 pts)
2. Enforce referential integrity for all tables (Hint: Foreign Key) (Exceptions: HISTORY tables).
(0.50 pts)
3. The ORDER table in the database is not normalized and may have to be broken into two tables- ORDER and ORDERDETAILS.
(0.40 pts)
4. Each table must be in a (correct) relationship with at least one other table. (Exceptions: HISTORY tables). ( 0.10 for each relationship to a max of 1 pt)
(0.40 pts
5. Each item can be supplied by many suppliers, and each supplier can supply many items. Therefore, new tables may have to be created (Hint: Bridge tables—also known as associative entity table or junction table).
(0.20 pts)
6. Each employee can be in one or many projects. Each project can be associated with one or many employees. Therefore, new tables may have to be created (Hint: Bridge tables—also known as associative entity table or junction table).
(0.20 pts)
8. All possible values in the State column for CUSTOMERS, EMPLOYEES, and SUPPLIERS will come from the STATES table.
(0.60 pts total – 0.20 points each)
9. To further improve the database, enforce column-level integrity through field properties, input mask, validation rule, and lookup. Enforce the following rules:
a. FName and LName of EMPLOYEES and CUSTOMERS tables are required (Hint: Field properties).
(0.10 pts)
b. HomePhone and Mobile Phone of EMPLOYEES and CUSTOMERS number should be in the phone number format: (Hint: input mask).
(0.10 pts)
c. Employees can only be from the USA, Canada, or Mexico: (Hint: Validation rules).
(0.10 pts)
d. The State column in the EMPLOYEES, CUSTOMERS, and SUPPLIERS tables should contain a drop-down menu showing all states available. (Hint: lookup tab).
( Total .30 pts – 0.10 pts each)
10. Saving past addresses: When employees, customers, and suppliers change addresses, your organization wants to store their previous addresses. For this purpose, whenever there is a change in these tables, the changes need to be transferred into a history table. Use figure 1 below as reference. These history tables don’t have to be part of any relationships.
( Total 0.60 pts – 0.20 pts for each )
Close the database completely before uploading.