Overview and Objectives In this assignment, you will be doing your own statistic

Overview and Objectives
In this assignment, you will be doing your own statistical analysis from a data set you find online or in a newspaper/magazine. The statistical analysis will include items such as mean, median, 5 number summary, IQR, boxplot, standard deviation, range and z-score.
What you will Submit
You will be submitting your assignment as a PDF. In the submission, you must include a link to the article where you found your data set from, or a picture of your physical article from a newspaper/magazine.
Instructions:
Read the entire assignment. Make sure to complete all questions for the assignment.
To help you understand the directions for the assignment, watch the video below before completing the assignment.
Assignment:
In a newspaper, magazine, or on the internet, find an article that contains a data set of 15 or more values. Apply what you are learning about statistics to analyze the data and discuss the data within the context of the article. Follow the steps below, showing how you did all calculations.
Include the link to the article, or use a screenshot of the article that shows all of the data values.
Based on the data, tell the units of the variable. For example, in an article about a basketball player, the units might be the number of points scored per game, the number of games played per season, or the percentage of scored free throws.
Does the article describe the data using any statistics, such as an average or a range? If so, describe what statistic was used and how to calculate it. If the article didn’t state any statistics, give one statistic that could have been helpful to include and explain why it would be good to include.
Calculate the following statistics from the data. Show all your written work, or include an accessible link to the spreadsheet you used to do the calculations.
Mean and median
5 Number Summary, IQR, and boxplot
Standard Deviation (tell whether it is population or sample, and calculate it accordingly) and range
Ask a question about the data that can be answered using a z-score and probability. You will need to assume the data is normally distributed, which may not be true. An example could be, “What is the probability that this basketball player will score fewer than 15 points in their next game?” Then answer your question using the statistics you calculated, the z-score formula, and the z-score table.
Use the statistics you calculated to write a short analysis of the data. Use the context of the article to relate the numbers to the original topic. Ideas include describing the center and spread of the data, relating the mean and median if they are very different, or describing the spread of the data based on the 5 Number Summary. A specific example could be, “Although the player scores an average of 20 points per game, the standard deviation being 8.34 means that the number of points scored is highly variable. This might mean that the player has good games and bad games because the large variation means they are not consistent in the points they score.”
Submitting Your Work:
Click on the “Add Submission” button to upload a text document. PDF is the required file format. (From Word, choose ‘save as’ from the file menu; select PDF as the file format. From Google Docs., go to the File Menu and select Download as a PDF). We cannot open other file formats, e.g., .pages, .heic, etc., and do NOT accept a Shared Google Doc. Alternatively, you can use the text box on the submission page. You can create tables, add images, etc., using the formatting tools; click the first button on the menu bar to access them.
If your article is from a physical newspaper/magazine, you will need to either scan or photograph it. Make sure you save the image in a common file format; PDF is always the preferred file format. However, you can also use JPEG, GIF, or PNG. We recommend you put your file on a shared hard drive like Dropbox, Google Drive, iCloud, One Drive, etc. Use the online text box to provide us with the URL to the file. Remember to set the permissions on the file to ‘anyone with a link’.
Review the ‘submitting your assignment’ document we provided at the beginning of the course for more details.

Overview and Objectives In this assignment, you will be doing your own statistic

Overview and Objectives
In this assignment, you will be doing your own statistical analysis from a data set you find online or in a newspaper/magazine. The statistical analysis will include items such as mean, median, 5 number summary, IQR, boxplot, standard deviation, range and z-score.
What you will Submit
You will be submitting your assignment as a PDF. In the submission, you must include a link to the article where you found your data set from, or a picture of your physical article from a newspaper/magazine.
Instructions:
Read the entire assignment. Make sure to complete all questions for the assignment.
To help you understand the directions for the assignment, watch the video below before completing the assignment.
Assignment:
In a newspaper, magazine, or on the internet, find an article that contains a data set of 15 or more values. Apply what you are learning about statistics to analyze the data and discuss the data within the context of the article. Follow the steps below, showing how you did all calculations.
Include the link to the article, or use a screenshot of the article that shows all of the data values.
Based on the data, tell the units of the variable. For example, in an article about a basketball player, the units might be the number of points scored per game, the number of games played per season, or the percentage of scored free throws.
Does the article describe the data using any statistics, such as an average or a range? If so, describe what statistic was used and how to calculate it. If the article didn’t state any statistics, give one statistic that could have been helpful to include and explain why it would be good to include.
Calculate the following statistics from the data. Show all your written work, or include an accessible link to the spreadsheet you used to do the calculations.
Mean and median
5 Number Summary, IQR, and boxplot
Standard Deviation (tell whether it is population or sample, and calculate it accordingly) and range
Ask a question about the data that can be answered using a z-score and probability. You will need to assume the data is normally distributed, which may not be true. An example could be, “What is the probability that this basketball player will score fewer than 15 points in their next game?” Then answer your question using the statistics you calculated, the z-score formula, and the z-score table.
Use the statistics you calculated to write a short analysis of the data. Use the context of the article to relate the numbers to the original topic. Ideas include describing the center and spread of the data, relating the mean and median if they are very different, or describing the spread of the data based on the 5 Number Summary. A specific example could be, “Although the player scores an average of 20 points per game, the standard deviation being 8.34 means that the number of points scored is highly variable. This might mean that the player has good games and bad games because the large variation means they are not consistent in the points they score.”
Submitting Your Work:
Click on the “Add Submission” button to upload a text document. PDF is the required file format. (From Word, choose ‘save as’ from the file menu; select PDF as the file format. From Google Docs., go to the File Menu and select Download as a PDF). We cannot open other file formats, e.g., .pages, .heic, etc., and do NOT accept a Shared Google Doc. Alternatively, you can use the text box on the submission page. You can create tables, add images, etc., using the formatting tools; click the first button on the menu bar to access them.
If your article is from a physical newspaper/magazine, you will need to either scan or photograph it. Make sure you save the image in a common file format; PDF is always the preferred file format. However, you can also use JPEG, GIF, or PNG. We recommend you put your file on a shared hard drive like Dropbox, Google Drive, iCloud, One Drive, etc. Use the online text box to provide us with the URL to the file. Remember to set the permissions on the file to ‘anyone with a link’.
Review the ‘submitting your assignment’ document we provided at the beginning of the course for more details.

Goals: · We will look at a conditional statement with a conjunction and analyze

Goals:
· We will look at a conditional statement with a conjunction and analyze its truth table, then create a logic circuit that will mimic this truth table output.
· The goal is to learn more about truth tables, logic circuits, and how the logic circuit can be an example application of a symbolic logical statement.
· You can find/use a truth table generator at: https://web.stanford.edu/class/cs103/tools/truth-table-tool/
· We will utilize a free online logic circuit emulator “digital logic simulator” called logic.ly
https://logic.ly/demo
Important Info

The order was placed through a short procedure (customer skipped some order details).
Please clarify some paper details before starting to work on the order.

Type of paper and subject
Number of sources and formatting style
Type of service (writing, rewriting, etc)

Dear writer what i want is to implement this survey into SPSS and AMOS too and d

Dear writer what i want is to implement this survey into SPSS and AMOS too and do the following:
in SPSS:
▪️Descriptive Analysis – frequencies
▪️Correlations – correlation Table
▪️ Regression – Model summary – ANOVA – coefficients
▪️ Reliability – Reliability Statistics Table (Cronbach’s Alpha) ▪️ Moderator & Mediator – using Process v4.3
in AMOS:
▪️ EFA – KMO and Barlett’s Test – Rotated Component Matrix ▪️ Validity – Communalities
▪️CFA – Standardized Regression Weights
– Model Fit Summary’s (3 tables)
* CMIN
* RMR, GFI
* Baseline Comparisons
after doing all this kindly share the SPSS files and the AMOS files.

Dear writer what i want is to implement this survey into SPSS and AMOS too and d

Dear writer what i want is to implement this survey into SPSS and AMOS too and do the following:
in SPSS:
▪️Descriptive Analysis
– frequencies
▪️Correlations
– correlation Table
▪️ Regression
– Model summary
– ANOVA
– coefficients
▪️ Reliability
– Reliability Statistics Table (Cronbach’s Alpha)
▪️ Moderator & Mediator
– using Process v4.3
in AMOS:
▪️ EFA
– KMO and Barlett’s Test
– Rotated Component Matrix
▪️ Validity
– Communalities
▪️CFA
– Standardized Regression Weights
– Model Fit Summary’s (3 tables)
* CMIN
* RMR, GFI
* Baseline Comparisons
after doing all this kindly share the SPSS files and the AMOS files.