Category: Engineering

Using google scholar find sources as evidence for disucssion for sections “Pump system LAB-PERFORMANCE OF CENTRIFUGAL PUMP”, ‘Heat Transfer LAB-Forced convection in extended surfaces” and “Refrigeration LAB-REFRIGERATOR TRIAL”. Discuss the Derived results and curves obtained (with reference to the objectives). Why are the characteristics as they are? Comment on errors and possible improvements.
for Pump system LAB-PERFORMANCE OF CENTRIFUGAL PUMP, mainly discuss the following:
Discuss the results and curves obtained (with reference to the objectives). Why are the characteristics as they are? Try to find corroborating evidence.
7.2 Comment on the comparison of actual data recorded in each test and that predicted from the single speed operation at 3000 rev/min.
7.3 Comment on errors and possible improvements.
for Heat Transfer LAB-Forced convection in extended surfaces, mainly discuss the following:
Discuss the influence of the flow velocity on the surface temperature and the overall heat transfer in the report, explaining the implication of flow velocity into Nusselt number hence the convection heat transfer coefficient based on the following correlation as per the theory section.
for Refrigeration LAB-REFRIGERATOR TRIAL, mainly discuss the following:
The trends noticed in the efficiencies of the various components
• The calculated COP results in relation to the trends and values which are suggested by ideal Carnot analysis.
• The main differences between the types of COPs calculated.

Just follow the intrusions in the pdf the pictures below but the field you’re doing about is the ( Engineering field ) please make sure to do about this field and follow the steps, thanks

Introduction:
A major strategy for reducing energy demand in a building is to temporarily raise the space temperature setpoint. We want to create a simulation that will calculate the required setpoint for a prescribed cooling load reduction. We want to estimate these parameters using sensors that are available on typical, real-world systems.
‘Dummy’ System
utilize the ‘Dummy System’ model to verify that system can accurately measure cooling load
o Room Dimensions 18x12x12 (lwh) (ft)
o Corner Office
 (1) 12×12 – Window (ft)
 (1) 18×12 wall (ft)
Task:
expected large internal gains (any number of examples)
Calculate RC values

Introduction:
A major strategy for reducing energy demand in a building is to temporarily raise the space temperature setpoint. We want to create a simulation that will calculate the required setpoint for a prescribed cooling load reduction. We want to estimate these parameters using sensors that are available on typical, real-world systems.
‘Dummy’ System
utilize the ‘Dummy System’ model to verify that system can accurately measure cooling load
o Room Dimensions 18x12x12 (lwh) (ft)
o Corner Office
 (1) 12×12 – Window (ft)
 (1) 18×12 wall (ft)
Task:
expected large internal gains (any number of examples)
Calculate RC values

Q1. In any organization, projects could be both internal and external. Internal projects are executed to enhance capability and/or capacity of an organization and are sourced from within the organization. Whereas external projects are executed for clients external to the organization. Give examples of both internal and external projects for an organization. Also explain with justifications and examples if Project Portfolio Management (PPM would be applicable for only the selection of external projects or for selecting both types of projects?
Q2. A project charter is ideally developed for each project. What is a project charter and what possible assistance can a project charter provide in PPM and how?
Q3. What are the differences in the focus of “Project Management (PM)” and “PPM” over the PPM lifecycle? What performance measures can be used to evaluate a project from the perspective of PM and PPM?
Notes:
Questions may have several parts. Please ensure to attempt all parts.
There is no limit on the number of pages.
Copied assignments will be graded ‘F’.
Assignments should be neatly executed with use of at least two colors (e.g., headings/table and figure titles in black with rest of the content in blue).
Assignments should contain a title page clearly stating the name of the student and his ID.
Assignments should be legible (good writing) and understandable (good English). Failing to meet any one of the criteria will result in -ve grading.
References for data obtained from other sources should be clearly indicated at the end.

I have to do few exhibits for my report. I have all the work done I’m only struggling with making the format for the exhibit (for ex, how do I add my pdf plan to a word doc……. (1) I need someone to create a Word file of exhibits exactly like the SAMPLES FILE attached. (2) I aslo need to show me steps by step how you did it…. I will share the work I need when it got accepted and work is 2-4 pages pdf to
this is the file of the work I want the exhibit for, Please follow the file I attached to create the exhibit, Please send me a separate file showing me step by step how you did them

Please follow the instruction before answering the question.
Review Slides, including videos, and discuss the following items in relation to the Dark Side of High Tech:
QUESTIONS: Talk about the current status of electronics disposal. Is it still impacting third world and developing countries?
Discuss the impact of the high tech industry on the environment in different regions of the world.
In closing, discuss if you agree with this information, and
What you could do personally to help?
Please show your ability to persuade the reader of your position, supported by facts/examples from the specific cases and your knowledge and views of the current engineering climate. (engineering ethics, knowledge of an engineer in geotechnical field, and so on)

Please take on this order only if you are an expert thas has knowledgable in advanced Thermodynamics in order to conduct analysis of Exergy and Energy on a power plant that consist of components with all necessary information needed available such as Turbines and Compressors and Pumps, etc.
All data are in the excel file attached and the analysis will be conducted in Excel. All information needed about the plant, properties, equations, deliverables required from the expert, etc are in the pdf file attached.
The figures show:
1- A sketch of a Combined Power Plant
2- Data for the Power Plant at 100% and 75% Loads with Natural Gas and Fuel Oil types of fuel.
3- Relations to help you analyzing the Plant.
You need to:
1- Perform energy analysis of the plant for all conditions provided. (for each component, for the
two parts of the plant, and for the whole plant)
2- Perform Exergy analysis for the plant for all conditions provided. (for each component, for the
two parts of the plant, and for the whole plant)
3- Write a report and include your conclusions based on the performed analysis.
Please be competent in the analysis and make it easy and well structured to follow and clear enough to get high grade. We are using two books in the class by Moran and Cengel. If you need them, let me know.
Let me know if you have any questions.

• Measures of Operational success. Within the context of measures of operational success address how it aligns with Quality Management and complete an analysis of its relevance and underpinning principles. (60 /100%). Review an organization that demonstrates these principles. Complete an analysis of their structure in relation to the topic presented and where required, advise them on how to put these principles into practice. (40%/100%). Your paper must be professionally presented, and academic references used as required using the Harvard reference style. Submission Guidelines – 1250 word essay (+/- 5%). – 12pt / 1.5 spacing / 1.27 margins

please find attached 2 questions homework, make sure it’s less than 10% plarigarism & references to be added