Category: Engineering

The thesis will address the challenge of securing container network communications in DevOps environments. With the rapid adoption of containerization for application deployment, network security within these containers has become a critical concern. Specifically, it will focus on vulnerabilities that arise in inter-container communications, the lack of visibility into encrypted traffic and the challenges in implementing dynamic security policies.
This should be undergaduate thesis and the topic is cyber security related.

Choose a significant accident. For example…
Challenger Shuttle Explosion
Chernobyl
Boeing 737-Max
Buncefield Oil Terminal
Air France Flight 447
BP Deepwater Horizon
Costa Concordia
Tesla Autonomous vehicle crash 7th May 2016
OR a less well known event (e.g. from https://www.gov.uk/government/organisations/rail-accident-investigation-branch Links to an external site.)
Read up, watch and analyse that accident
Complete a structured essay. There are set sections you need to complete. These are…
Title (0 marks)
Give the title of your accident
Part 1 (20 marks; maximum 400 words)
Give an overview of the accident, including the technical or engineering failures that might be relevant. Part 2 (40 marks in total for part 2; maximum 800 words in total for part 2)
Describe the wider systems issues that contributed to the accident. These include
2.1 Physical/actor events, decision, process and conditions leading to event 2.2 Supervision and organisational factors leading to event
2.3 External (governments, societal, policy, commercial pressure) factors leading to event
Part 3 (40 marks; maximum 800 words)
Design, training, process and culture solutions. Ways that the accident could have been averted, or changes that have been introduced since to manage wider systems issues that led or contributed to the accident.
For your answers, feel free to include links to other material, or images / figures / tables (Canvas will include these in your word count).
Please also add references at the end. APA or Harvard is good for referencing.
Please put a word count after each section. You may include images and figures. • Good answers
Have a clear description of the accident
Think about human and organizational causes or factors during but also before the accident
Refer back to some of the principles of Ergonomics and Human Factors, and Methods and User-Centred Design
Think of engineering and human solutions
• Not so good answers
Have a very short description of the accident, or also use part 2 describes the accident
Only limited thinking about people and what might have led to the accident
Do not refer to Human Centered Design
Just describe technical solutions

I need Background and Literature Review for survey research aims to investigate technology management practices in the deployment of wireless charging infrastructure for electric vehicles (EVs). The study seeks to assess the current status of wireless charging technology implementation, identify key technological challenges and opportunities, explore strategies for technology integration and standardization, and investigate stakeholder roles and collaborations in driving innovation and adoption. The research will involve a structured covering various aspects of technology management, targeting a diverse sample including EV manufacturers, charging infrastructure providers, technology developers, policymakers, and researchers. Data collection will be conducted online from IEEE, Google scholar and EV charging summits and conferences. Statistical analysis will be employed to identify common themes, trends, and patterns in technology management practices, generating insights to inform recommendations for enhancing technology management in wireless charging deployment. Ultimately, the findings of this research can facilitate the adoption of wireless charging technology and support the transition towards a sustainable transportation ecosystem. The importance of this research lies in its potential to address critical challenges and opportunities in the deployment of wireless charging infrastructure for electric vehicles (EVs). As the automotive industry increasingly shifts towards electrification, ensuring the availability of efficient and convenient charging solutions is paramount. Wireless charging technology offers significant advantages in terms of convenience and scalability, potentially overcoming limitations associated with traditional wired charging methods.

I. Introduction
A. Background
1. Brief overview of traditional large-scale nuclear reactors
2. Introduction to small-scale nuclear reactors (SMRs)
B. Motivation
1. Need for alternative and sustainable energy sources
2. Advantages of SMRs in addressing energy challenges
II. Technical Aspects of SMRs
A. Overview of Small Modular Reactors
1. Definition and characteristics
2. Various designs (light-water reactors, high-temperature gas-cooled reactors, molten salt reactors)
B. Safety Features
1. Passive safety systems
2. Comparison with safety features of traditional reactors
C. Scalability and Flexibility
1. Modular design and construction
2. Applications beyond electricity generation (industrial processes, desalination)
III. Economic Considerations
A. Capital Costs
1. Comparison with large-scale reactors
2. Manufacturing and construction advantages
B. Construction Times
1. Shorter timelines due to modular design
2. Implications for project financing and return on investment
IV. Regulatory Challenges and Framework
A. Licensing Requirements
1. Adaptation of existing regulations
2. Addressing safety concerns and risk assessment
B. Proliferation Risks
1. Measures to mitigate proliferation risks
2. International cooperation and standardization
V. Public Perception and Social Acceptance
A. Public Concerns
1. Safety and environmental impact
2. Nuclear waste management
B. Communication Strategies
1. Addressing public concerns through effective communication
2. Public engagement and education initiatives
VI. **Case Studies and Applications**
A. Successful Deployments
1. Highlighting existing SMR projects
2. Lessons learned and best practices
B. Potential Applications
1. Exploration of various sectors benefiting from SMRs
2. Future possibilities and emerging markets
VII. Research and Development Initiatives
A. Current State of R&D
1. Collaborative efforts between governments, industry, and research institutions
2. Ongoing advancements and innovations
B. Future Prospects
1. Potential breakthroughs and technological advancements
2. R&D needs for further SMR development
VIII. Conclusion
A. Summary of Key Findings
1. Technical advancements and safety features
2. Economic viability and regulatory challenges
B. Recommendations and Future Directions
1. Policy recommendations
2. Areas for further research and development
IX. References
– Citations of relevant literature, research papers, and authoritative sources.

This assignment builds off of the Overbooking case study from Chapter 9 in the Clemen and Reilly text.
Your task: submit a single excel spreadsheet with the following:
1. Construct a simulation model of the Mockingbird Airlines system. Each iteration of your simulation should assign a random number of shows/no-shows based on a binomial distribution.
2. Mockingbird needs to decide between selling 16, 17, 18, or 19 seats per flight. Run your simulation 1,000 times for each possible decision and gather the results (i.e., the profit for each run).
3. Provide a table with the average profit and standard deviation of the profit for each of the four possible choices.
4. Expand your simulation model to include uncertainties for the no-show rate and the cost per bumped passenger. Model the no-show rate as a uniform distribution between 0.02 and 0.06. Instead of a fixed $225 + $100 per bumped passenger, model the cost per bumped passenger as a normal distribution with a mean of $300 and and standard deviation of $40.
5. Provide a table with the average profit and standard deviation of the profit for each of the four possible choices.

Assignment Content
Submit your recorded final presentationAssignment Format: MS Powerpoint Slide Deck; APA format
Submission Format: Blackboard Submission
Length: 8 – 10 slides; 10 minute Zoom Video maximum
Citations Required: 5-7 References
Points: 100 points out of 1,000 points course total
format for the slides are:Introduction: Amazon and the Case Study
Current State of the Business
Amazon Businesses
Supporting business and technology strategies behind those businesses
Three portions of the business that will drive the future of the business
Supporting business and technology strategies behind those future businesses
Summary
PowerPoint SpecificationsFollow the PowerPoint Rule of 6 (no more than 6 words per point, no more than 6 points per slide)
Limited/Meaningful Clipart or Pictures
MS Powerpoint Theme is required
MS Powerpoint Presentation Suggested Layout:Cover Slide – Include Unique Title, Full Name, Cohort #and Course Name, Date Submitted
Agenda Slide – Outline for the presentation – what will you tell them
8-10 slides related to the content
References Slide – List at least 5 – 7 references (APA format)
Requirements: follow instructions

(due to same topic before )Part one (need finish before 2/28)(other part i can give more time )
Your outline submission should demonstrate your ability to present a clear narrative, showcase critical thinking skills, and provide evidence to support your final solution recommendation. Please include your cited research summary and links (minimum of 9).
Remember to discuss:
Challenge secondary research
Problem statement & evidence from research
SWOT analysis
Ideation summary
Final solution selection
Innovation criteria
Possible further qualitative research
Final solution recommendation
Submit online or as a .pdf
(Please see Module 8 – Start Here, for specific example in how to write your outline)
Part 2Please write a short paragraph sharing what you have learned in this course and answer the following prompts in your paragraph:
– What was new to your in this innovation & technical writing course?
– What was one thing that surprised you?
– What were you grateful to have learned?
– Which format/tool/technique do you feel that you would use again?
– What is one piece of advice you would give to another student taking this course?
part 3
Assignment Due:
As the consultant for your selected business challenge, your clients now expect to hear your recommendation.
You will submit a full 30-page report on your selected business challenge and why you’ve landed on the most impactful final solution after using the innovation framework. You will discuss your challenge research, your problem statement, which solution options you explored and why, and deliver an argument for why your final solution using the innovation criteria. Please note: you’ve spent the last 9-10 weeks compiling this report’s different aspects. Please ensure all elements build upon one another into one cohesive story.
All submissions must be .pdfs, in size 12 font, with APA-7 guidelines.
Please ensure to include footnotes and appendices, your research references (minimum of 9) will be checked.
Advised to have the writing center review all papers for grammar and spelling corrections before submission.
Page count includes title and reference pages. However, full-page graphics are not advised given that this is a writing assignment to tell a cohesive story. Graphics may take up 1/3 or 1/4 of the page.
APA-7 supplemental resources here:
https://apastyle.apa.org/style-grammar-guidelines/paper-format/sample-papersLinks to an external site.
https://apastyle.apa.org/products/supplemental-resourcesLinks to an external site.
https://apastyle.apa.org/products/publication-manual-7th-edition?tab=9Links to an external site.
Assignment 7 is just answer question

(due to same topic before )Part one (need finish before 2/28)
Your outline submission should demonstrate your ability to present a clear narrative, showcase critical thinking skills, and provide evidence to support your final solution recommendation. Please include your cited research summary and links (minimum of 9).
Remember to discuss:
Challenge secondary research
Problem statement & evidence from research
SWOT analysis
Ideation summary
Final solution selection
Innovation criteria
Possible further qualitative research
Final solution recommendation
Submit online or as a .pdf
(Please see Module 8 – Start Here, for specific example in how to write your outline)
Part 2Please write a short paragraph sharing what you have learned in this course and answer the following prompts in your paragraph:
– What was new to your in this innovation & technical writing course?
– What was one thing that surprised you?
– What were you grateful to have learned?
– Which format/tool/technique do you feel that you would use again?
– What is one piece of advice you would give to another student taking this course?
part 3
Assignment Due:
As the consultant for your selected business challenge, your clients now expect to hear your recommendation.
You will submit a full 30-page report on your selected business challenge and why you’ve landed on the most impactful final solution after using the innovation framework. You will discuss your challenge research, your problem statement, which solution options you explored and why, and deliver an argument for why your final solution using the innovation criteria. Please note: you’ve spent the last 9-10 weeks compiling this report’s different aspects. Please ensure all elements build upon one another into one cohesive story.
All submissions must be .pdfs, in size 12 font, with APA-7 guidelines.
Please ensure to include footnotes and appendices, your research references (minimum of 9) will be checked.
Advised to have the writing center review all papers for grammar and spelling corrections before submission.
Page count includes title and reference pages. However, full-page graphics are not advised given that this is a writing assignment to tell a cohesive story. Graphics may take up 1/3 or 1/4 of the page.
APA-7 supplemental resources here:
https://apastyle.apa.org/style-grammar-guidelines/paper-format/sample-papersLinks to an external site.
https://apastyle.apa.org/products/supplemental-resourcesLinks to an external site.
https://apastyle.apa.org/products/publication-manual-7th-edition?tab=9Links to an external site.
Assignment 7 is just answer question

(due to same topic before )Part one (need finish before 2/28)
Your outline submission should demonstrate your ability to present a clear narrative, showcase critical thinking skills, and provide evidence to support your final solution recommendation. Please include your cited research summary and links (minimum of 9). Remember to discuss:
Challenge secondary research
Problem statement & evidence from research
SWOT analysis
Ideation summary
Final solution selection
Innovation criteria
Possible further qualitative research
Final solution recommendation
Submit online or as a .pdf
(Please see Module 8 – Start Here, for specific example in how to write your outline) Part 2Please write a short paragraph sharing what you have learned in this course and answer the following prompts in your paragraph: – What was new to your in this innovation & technical writing course?
– What was one thing that surprised you?
– What were you grateful to have learned?
– Which format/tool/technique do you feel that you would use again?
– What is one piece of advice you would give to another student taking this course?
part 3
Assignment Due:
As the consultant for your selected business challenge, your clients now expect to hear your recommendation.
You will submit a full 30-page report on your selected business challenge and why you’ve landed on the most impactful final solution after using the innovation framework. You will discuss your challenge research, your problem statement, which solution options you explored and why, and deliver an argument for why your final solution using the innovation criteria. Please note: you’ve spent the last 9-10 weeks compiling this report’s different aspects. Please ensure all elements build upon one another into one cohesive story. All submissions must be .pdfs, in size 12 font, with APA-7 guidelines. Please ensure to include footnotes and appendices, your research references (minimum of 9) will be checked. Advised to have the writing center review all papers for grammar and spelling corrections before submission. Page count includes title and reference pages. However, full-page graphics are not advised given that this is a writing assignment to tell a cohesive story. Graphics may take up 1/3 or 1/4 of the page.
APA-7 supplemental resources here:
https://apastyle.apa.org/style-grammar-guidelines/paper-format/sample-papersLinks to an external site.
https://apastyle.apa.org/products/supplemental-resourcesLinks to an external site.
https://apastyle.apa.org/products/publication-manual-7th-edition?tab=9Links to an external site.
Assignment 7 is just answer question

The issue of high supply solar power /renewable generation while the demand is low + the need to have steam turbines and gas turbines for desalination purposes or during solar fluctuations in the uae or the gcc
How can we fix or go around the issue providing actual resources and other authorities practices