Category: Engineering

Task summary: You are to complete the project by creating an “A-frame Stand” similar to the one in the figure below with a narrower width.
Full order description: Dear Freelancer, please complete the following task:
📋 EXAMPLES OF PROBLEMS OR QUESTIONS: Scope of the project/design criteria:
1) Use a CAD software to create a 3D model of the new A-frame stand design.
2) Identify the standard that such a design would have to comply with.
3) The A-frame stand design is to be able to withstand a 30,000 lbs load applied symmetrically at two stand pockets (15,000 lbs on each side). The pockets are to be 35″ away from each other. (see figure below for illustration)📎 ATTACHED:-Instructions. –

Objective:
The objective of this assignment is to deepen your understanding of basic circuits by designing and analyzing a circuit comprising essential components like resistors and batteries. Through this assignment, you will not only construct a circuit but also reinforce your knowledge by performing relevant calculations to support your design.
Task:
1. Design a Basic Circuit:
– Create a simple circuit consisting of at three resistors or more and one battery.
– Choose appropriate values for the resistor(s) and battery voltage to ensure the circuit operates within safe limits.
– Use circuit design software (e.g., , Multisim) or physical components if available.
2. Calculate Circuit Parameters:
– Calculate the total resistance (R_total) of the circuit.
– Determine the total current (I_total) flowing through the circuit.
– Compute the voltage drop across each resistor (if multiple resistors are used).
– Ensure you understand and apply Ohm’s Law (V = I * R) and series/parallel resistor configurations if applicable.
3. Prepare Presentation:
– Create a presentation (slides or video format) explaining your circuit design and calculations.
– Include the following elements:
– Introduction to the circuit components used (resistors, batteries).
– Schematic diagram of the circuit.
– Explanation of how the circuit operates.
– Step-by-step calculation of circuit parameters (total resistance, total current, voltage drops).
– Any assumptions made during the design process.
– Safety considerations, if any.
– Use clear visuals and concise explanations to communicate your design effectively.

I need someone to work on OpenRail Designer.
To complete my work with the group.
My part is:
4/ CROSS-SECTIONS & TRACK COMPONENTS:
a. b and c
I have attached the design file that the group worked on, and now I must put my work and modify it. (Assignment 2 Final.dgn)
I also attached the report that the group worked on, then wrote and explained in the report. (Assignment 2 Report).

I wnat final project for STRUCTURAL & FORM DESIGN FOR INTERIORS 14 pages
Project Introduction
• Identify the need or problem by analyzing the real life scenarios
• Aims
• Develop possible alternative solution in terms of materials ,supports, dimensions etc
• Select the best solution.
2. Project Design Concept
• The fundamental structure
• Theory that you are going to implement,
• Type of the structure (building, bridge, truss, furnitures)
• Preparation for Implementation phase,
• Idea generation
3. Implementation phase
• Technical Drawings including the dimensions ,different views etc.
• Material selection (in terms of construction and finishing)
• Type of supports
• Construct the three scenarios of the prototype.

Instructions will be uploaded later.
Important Info

The order was placed through a short procedure (customer skipped some order details).
Please clarify some paper details before starting to work on the order.

Type of paper and subject
Number of sources and formatting style
Type of service (writing, rewriting, etc)

Engineering science:
The solution must be handwritten, clear and organized, the issue must be in one color, the two laws in another colour, and so on
Important Info

The order was placed through a short procedure (customer skipped some order details).
Please clarify some paper details before starting to work on the order.

Type of paper and subject
Number of sources and formatting style
Type of service (writing, rewriting, etc)

Complete the attached excel analysis for the maintenance cycle time values. Plot Frequency Histogram and Relative Frequency Histogram in excel.

Complete the attached excel sheet for Failure Mode and Effect Analysis for a paper manufacturing company.

Complete the attached excel analysis for the maintenance cycle time values. Plot Frequency Histogram and Relative Frequency Histogram in excel.

Instructions will be uploaded later.
Important Info

The order was placed through a short procedure (customer skipped some order details).
Please clarify some paper details before starting to work on the order.

Type of paper and subject
Number of sources and formatting style
Type of service (writing, rewriting, etc)