Category: Autocad

a dwg file will be zipped and attached below, in the dwg there’s a a 3D layout of a bathroom, keep the same layout design but add objects as if someone with a wheel chair was in there. add handle bars by the toilet make the turning radius 67′ rather than 60′ and add a standing shower to the left

a dwg file will be zipped and attached below, in the dwg there’s a a 3D layout of a bathroom, keep the same layout design but add objects as if someone with a wheel chair was in there. add handle bars by the toilet make the turning radius 67′ rather than 60′ and add a standing shower to the left

a dwg file will be zipped and attached below, in the dwg there’s a a 3D layout of a bathroom, keep the same layout design but add objects as if someone with a wheel chair was in there. add handle bars by the toilet make the turning radius 67′ rather than 60′ and add a standing shower to the left

a dwg file will be zipped and attached below, in the dwg there’s a a 3D layout of a bathroom, keep the same layout design but add objects as if someone with a wheel chair was in there. add handle bars by the toilet make the turning radius 67′ rather than 60′ and add a standing shower to the left

a dwg file will be zipped and attached below, in the dwg there’s a a 3D layout of a bathroom, keep the same layout design but add objects as if someone with a wheel chair was in there. add handle bars by the toilet make the turning radius 67′ rather than 60′ and add a standing shower to the left

INSTRUCTIONS ATTATCHED
As part of this assignment, you are required to submit the following deliverables:
REVIT Model File: Please provide the complete REVIT model file for your assigned project. Ensure that all components and details are accurately represented.
Rendered Perspectives (Minimum of FIVE): Create a minimum of five rendered perspectives, encompassing both interior and exterior views of your project. Merge these perspectives into a single PDF file.Note: If you are not familiar with the rendering process, you have the option to submit five screenshots from different perspectives. Include these screenshots in your PDF file.

INSTRUCTIONS ATTATCHED
As part of this assignment, you are required to submit the following deliverables:
REVIT Model File: Please provide the complete REVIT model file for your assigned project. Ensure that all components and details are accurately represented.
Rendered Perspectives (Minimum of FIVE): Create a minimum of five rendered perspectives, encompassing both interior and exterior views of your project. Merge these perspectives into a single PDF file.Note: If you are not familiar with the rendering process, you have the option to submit five screenshots from different perspectives. Include these screenshots in your PDF file.

I was trying to layout but,I have no idea how to put everything in it. could you help me to layout this? There are photo of map and scale. Also, there are photo of what I need so spaces. All you need to care is quantity and space allocation. I don’t think I can’t fit all the space in this area so I need help.

please using the Zip file below take 3D walkthrough images and send them in, like the example image

Steps:
Open a New Drawing: Launch AutoCAD 2023 and open a new drawing file.
Set Units: Set your drawing units to architectural units. Type UNITS and choose “Architectural” from the list.
Create Layers:Type LAYER in the command line and press Enter.
Create layers for different elements, such as “Walls,” “Doors,” “Windows,” “Text,” “Circles_Arcs,” and “Lines.” Assign each object to the appropriate layer as you create it.
Turn Off Unnecessary Layers:Initially, turn off all layers except for the “Walls” layer. You can do this by clicking the light bulb icon next to each layer name in the Layers panel.
Draw the Room: Use the RECTANGLE command to draw a rectangular room on the “Walls” layer. Specify two opposite corners by entering the coordinates: (0,0) and (144,120).
Add Walls: Use the OFFSET command to create walls on the “Walls” layer. Enter an offset distance of 6 inches (0.5 feet) and select the inner edges of the room’s rectangle to create the walls.
Turn On the “Doors” Layer:Before adding a door, turn on the “Doors” layer and make it the current layer.
Insert a Door: Use the RECTANGLE command to draw a rectangle for the door on the “Doors” layer. Place it along one of the walls. You can use coordinates like (60,0) for the lower-left corner and (72,6) for the upper-right corner.
Turn On the “Windows” Layer:Before adding a window, turn on the “Windows” layer and make it the current layer.
Insert a Window: Draw a rectangle for the window using the RECTANGLE command on the “Windows” layer. Place it on another wall, using coordinates like (24,0) for the lower-left corner and (48,6) for the upper-right corner.
Turn On the “Circles_Arcs” Layer:Before adding arcs and circles, turn on the “Circles_Arcs” layer and make it the current layer.
Add a Circular Light Fixture: Use the CIRCLE command to add a circular light fixture on the “Circles_Arcs” layer. Specify the center point and the radius.
Draw an Arc: Use the ARC command on the “Circles_Arcs” layer to draw an arc within the room. For example, draw an arc from one corner of the room to the opposite corner.
Turn On the “Lines” Layer:Before drawing a line, turn on the “Lines” layer and make it the current layer.
Draw a Line: Use the LINE command on the “Lines” layer to draw a line segment within the room. Place it creatively to represent a design element or furniture.
Turn On the “Text” Layer:Before adding labels, turn on the “Text” layer and make it the current layer.
Add Labels: Use the TEXT command on the “Text” layer to label the room as “Bedroom.” Place the text at coordinates (72,12). You can also label the door, window, and light fixture.
Set Linetypes and Colors:Use the LTSCALE command and set it to 1 for consistent linetype scaling on all layers.
Type LTYPE in the command line to access the Linetype Manager. Choose appropriate linetypes for each layer (e.g., “Continuous” for walls, “Hidden” for doors, “Dashed” for windows) and assign colors as desired.
Save Your Work: Save your drawing with a descriptive name.
By keeping arcs and circles in the same “Circles_Arcs” layer, you can maintain organization while grouping these similar elements together.
Sample Coordinate Points:
Room Outline: (0,0) – (144,120)
Door: (60,0) – (72,6)
Window: (24,0) – (48,6)
Room Label: (72,12)
Light Fixture: Specify a center point and radius.
Arc: Place it creatively within the room.
Line: Draw a line segment within the room.
Circular Table: Specify a center point and radius.
Tips:
Use the “SNAP” feature to ensure precise drawing.
Zoom in and out using the scroll wheel of your mouse for better visibility.
Experiment with different linetypes, colors, and layer assignments to practice adjusting settings.
In this exercise, you will create a simple floor plan using AutoCAD 2023. The drawing will include the following elements in a Floor Plan
Room: A rectangular room with dimensions of 144 inches in length and 120 inches in width, representing the floor plan.
Walls: Interior walls created using the OFFSET command. The walls are 6 inches (0.5 feet) thick.
Door: A rectangular door within one of the walls. The door measures 12 feet in width and 7 feet in height.
Window: A rectangular window on another wall. The window measures 2 feet in width and 2 feet in height.
Circular Light Fixture: A circular light fixture in the center of the ceiling with a specified radius.
Arc: An arc drawn creatively within the room, connecting two corners.
Line: A line segment representing a design element or furniture within the room.
Labels: Text labels for the room, door, window, and light fixture.
Layer Organization: Each element is organized into separate layers (e.g., “Walls,” “Doors,” “Windows,” “Text,” “Circles_Arcs,” and “Lines”) for better management and visibility.
Linetypes and Colors: Linetypes and colors are applied to layers to differentiate and emphasize various elements in the drawing. Linetypes such as “Continuous,” “Hidden,” and “Dashed” may be used based on layer assignments.
The exercise provides a comprehensive introduction to AutoCAD’s essential tools, including drawing, modifying, adding text, adjusting settings, and organizing elements into layers with appropriate linetypes and colors. The result is a well-structured and visually informative floor plan drawing suitable for various architectural or design purposes, with detailed measurements provided for accuracy.
Dear Students,
This assignment allows you to submit multiple times, giving you the opportunity to revise and improve your work. Please follow these guidelines:
Number of Submissions: You are allowed to submit this assignment multiple times, up to the maximum number of 2 submissions
Due Date: Be mindful of the due date for each submission. You can view this information in the assignment description.
Initial Submission: Your first submission should be treated as your initial attempt and consider for your attendance
Revisions and Improvements: If you choose to revise your work, please do so before the final due date. Each subsequent submission will overwrite the previous one, so make sure you have made all necessary improvements before resubmitting.
Final Submission: Your final submission, which should be your best work, should be made by the final due date and time specified in the assignment settings. However, only the marks for attendance will be received.