ChatGPT was asked to write a set of instructions on how change a tire on a 2010

ChatGPT was asked to write a set of instructions on how change a tire on a 2010 Scion XB automobile.
The instructions that ChatGPT produced are not very effective. What are some of the shortcomings of the set of instructions.
Please write a paragraph in which you state 2-3 problems with the following set of instructions:
Here are the step-by-step instructions on how to change a tire in a 2010 Toyota Scion XB:
1. Find a safe location: Move your vehicle to a level and safe area, away from traffic, and turn on your hazard lights.
2. Gather the tools: Your vehicle should come with a jack, lug wrench, and spare tire, locate these items in the trunk or under the car.
3. Loosen the lug nuts: Use the lug wrench to loosen the lug nuts on the tire you want to change. Turn each lug nut counterclockwise but don’t remove them yet.
4. Jack up the car: Place the jack in the designated jack points underneath the car, then pump the jack handle until the car is high enough for you to change the tire.
5. Remove the lug nuts and old tire: Unscrew the lug nuts completely and remove the old tire from the wheelbase.
6. Put on the spare tire: Place the spare tire onto the wheelbase and hand-tighten the lug nuts.
7. Lower the car and tighten the lug nuts: Use the jack handle to lower the car back down to the ground. Then, using the lug wrench, tighten the lug nuts as much as possible in a star pattern.
8. Check the tire pressure: Use a tire pressure gauge to check the pressure of the spare tire, and make sure it is inflated to the recommended pressure listed in your owner’s manual.
9. Put away the tools: Put the old tire, lug wrench, and jack back into the trunk or under the car.
10. Get your regular tire repaired or replaced: A spare tire is only meant to be a temporary fix, so take your regular tire to a professional to be repaired or replaced as soon as possible.
That’s it! You have successfully changed a tire on your 2010 Toyota Scion XB.