Use the following drawing to create a small profile. MIDTERM.dwg Download MIDTER

Use the following drawing to create a small profile. MIDTERM.dwg Download MIDTERM.dwg
Using the layout tabs in the attached drawing, print out in pdfs the “COVER, SITE PLAN AND PLAN AND PROFILE SHEET”
1) USE THE FOLLWOING WEBSITES TO FIND FIND INFORMATION REGARDING THE PROJECT AREA
ORANGE COUNTY PROPERTY APPRAISERS – https://vgispublic.ocpafl.org/webmapjs/
ORANGE COUNTY INFOMAP – https://ocgis4.ocfl.net/Html5Viewer/Index.html?viewer=InfoMap_Public_HTML5.InfoMap_Public
CREATE THE FOLLOWING MAPS AS YOU DID IN HOMEWORK 1B
Zoning
Soils Map
Floodplain Map for Project
Benchmark Data
Aerial of Project.
2) COVER SHEET – PARCEL NUMBER 01-23-28-0000-00-002 (S-T-R PARCEL ID)
PROJECT IS LOCATED IN ORANGE COUNTY, FLORIDA
PHYSICAL ADDRESS – 1800 S. KIRKMAN ROAD, ORLANDO, FL 32811
CURRENTLY ZONED AS INSTITUTIONAL
TO BE RE-ZONED AS RESIDENTIAL TO BE BUILT FOR STUDENT HOUSING
STATE WHAT YOU ARE PROPOSING TO REZONE THE SITE TO AND WHAT LOT DIMENSIONS AREA REQUIRED.
MINIMUM 10 LOTS
MINIMUM CENTERLINE RADIUS 50FT
MINIMUM EDGE OF PAVEMENT RADIUS 25FT
CURB RETURN 23 FT (2FT CURB)
ROW RADIUS AT INTERSECTIONS 25 FT
CREATE STREET NAMES (NAME ALL STREETS EVEN EXISTING STREETS)
3) CREATE SITE PLAN – INCLUDE THE FOLLOWING
DIMENSION LOTS,
DIMENSION RIGHT OF WAY
LABEL LOT NUMBERS AND TRACTS
SHOW SET BACKS
FRONT 25FT
REAR 10 FT
SIDE 5 FT
SIDE STREET 10 FT
SHOW EASEMENT
10 FT ON THE BACK OF RIGHT OF WAY LINE.
CREATE CENTERLINE ROAD ALIGNMENT (START WITH 10+00 STATION) AND LABEL WITH BEARING AND DISTANCES
TYPICAL SECTIONS FOR YOUR PROPOSED ROAD
* 50 FT ROW, 11 FT LANES, 2 FT CURB, 7FT GRASS @ 6% AND 5FT SIDEWALK AT 2% MIRRORED ABOUT THE CENTERLINE
* 56.5 FT ROW, 11 FT LANES, 6.5 ASPHALT FOR PARALLEL PARKING, 2 FT CURB, 7FT GRASS @ 6% AND 5FT SIDEWALK AT 2% ON ONE SIDE OF THE CENTERLINE AND 11 FT LANES, 2 FT CURB, 7FT GRASS @ 6% AND 5FT SIDEWALK AT 2% ON THE OTHER SIDE OF THE CENTERLINE.
4) CREATE GRADING WITH PLAN AN PROFILE
CREATE EXISTING AND PROPOSED PROFILE
FOR PROPOSED PROFILE – CREATE ONE VERTICAL CURVE -MINIMUM CURVE LENGTHS IS TO BE 100 FT
MINIMUM SLOPE OF PROPOSED GRADE 0.40%
SET LOW POINT ON ROAD TO BE AT LOT LINE
CREATE ASSEMBLY, CORRIDOR, SURFACE TO CREATE SPOT GRADES
SET FRONT, AND REAR LOT GRADES
SET FINISH FLOOR ELEVATIONS MINIMUM 2 FT ABOVE CENTERLINE ROAD
——-
Youtube links to have a better understanding of what’s needed :
https://www.youtube.com/watch?v=0NnAWF2m0KU&t=1s. (Homework1B that’s mentioned)

( These links are just to help to have a better understanding of the main project)

ORDER A SIMILAR PAPER NOW